index030024.jpg index030022.jpg index004003.jpg index005007.jpg
Copyright 1997-2017 Argus International. All rights reserved.
bookmarkwhitespot.jpg
PC3100 Series Heater/Drying Systems
The PC3100 series conveyor ovens are for heating flat work traveling horizontally. These series of machines are applicable for many types of processes including preheating, drying, curing, etc. The conveyor on this series machine is stainless steel mesh with inverted dimples to carry the work piece above the general plane of the mesh. The conveyor is driven by a variable speed motor. The conveyor speed is indicated on the control panel by a digital meter. The work is heated by long wavelength infrared energy emitted from IR panels above and below the conveyor. These panels are fast response to compensate for quick variances in the work load.

The PC3100 allows panels to enter the HAL system warm, this reduces the heat loading in the solder pot and can make some fluxes more active. Preheating of high-mass circuit boards enables increased HASL production by minimizing solder pot dwell times.
AVAILABLE OPTIONS
ENTRANCE EXTENSION: 6" [153mm] long conveyor added on the entrance of the dryer for manually loading.
ELECTRICAL SERVICE REQUIREMENTS
Circuit Breaker service is 2-phase configuration with a good Ground.
EXHAUST SERVICE REQUIREMENTS
SHIPPING DATA
Air Freight
800 lbs.
[362.9kg]
1200 lbs.
[544.3kg]
Model
Crate Size
Common Carrier
Crated Weight
PC3120SD
66" x 63" x 66"
[1.7m x 1.6m x 1.7m]
Crating dimensions and weights are approximate and may vary within 10%.
Model 200-240V 50/60Hz 380-415V 50Hz  440-480V 50/60Hz Power
PC3120SD 70A 50A 50A 16kVA
PC3130SD 100A 70A 70A 24kVA
Figure: PC3130SD Drying System Machine Dimensions
Figure: PC3120SD Drying System Machine Dimensions
Auxiliary Exhaust - * Blower and ducting to be supplied by user if necessary.
Model Exhaust Volume * Port Size Blower Power Ducting Diameter
PC3120SD
1000CFM
[28.3CMM]
8" [203mm] Diameter
1/3HP
8" [203mm]
Galvanized
PC3130SD
1000CFM
[28.3CMM]
8" [203mm] Diameter
1/3HP
8" [203mm]
Galvanized
850 lbs.
[385.6kg]
1250 lbs.
[567.0kg]
PC3130SD
66" x 63" x 66"
[1.7m x 1.6m x 1.7m]
index001011.jpg arguslogo.gif index001009.jpg index001007.jpg index001013.jpg index001005.jpg index001003.jpg index001001.jpg
Home | Products | Distributors | Topics | LPISM FAQ | About Us | Contact Us | Terms of Use | Site Map
Liquid Photo-Imageable Solder Mask | Photovoltaic Thin Film | Hot Air Leveling | Fusing | UV Processing