index004003.jpg index026020.jpg index005007.jpg
Copyright 1997-2017 Argus International. All rights reserved.
bookmarkwhitespot.jpg
PC3600 Series Preheating Triple Roller Stage Coater Systems
The PC3600 series flux application systems are designed to support the HAL5000 Hot Air Solder Leveling system by applying flux to circuit boards prior to the HASL process. The PC3600 employs three sets of nappy type rollers to provide complete flux coverage while minimizing flux usage. The first roller applies flux to the entire board surface. The second roller forces flux into the barrels and removes excess flux from the board surface. The third roller serves as a squeegee to remove all excess flux coverage. Excess flux is filtered and recycled providing a significant cost savings over traditional single applicator systems.

The PC3600 includes a mini-accumulator that enables the operator to make minor system adjustments without stopping production. The PC3600 preheating system is designed for use with high-mass circuit boards or with fluxes that require heat activation. Preheating of high-mass circuit boards enables increased HASL production by minimizing solder pot dwell times. Similar Argus products include PC3400 and PC3800 coating application systems.
AVAILABLE OPTIONS
BOARD MINI-ACCUMULATOR: Holds up to three boards while making it easier to handle the board from the machine by the outside edges of the board.
ELECTRICAL SERVICE REQUIREMENTS
Circuit Breaker service is 2-phase configuration with a good Ground.
EXHAUST SERVICE REQUIREMENTS
SHIPPING DATA
Air Freight
1200 lbs.
[544.3kg]
1300 lbs.
[589.7kg]
Model
Crate Size
Common Carrier
Crated Weight
PC3620SD
102" x 49" x 65"
[2.6m x 1.3m x 1.7m]
Crating dimensions and weights are approximate and may vary within 10%.
Model 200-240V 50/60Hz 380-415V 50Hz  440-480V 50/60Hz Power
PC3620SD 70A 50A 50A 16kVA
PC3630SD 100A 70A 70A 24kVA
Figure: PC3630SD Preheating Triple Roller Coating System Machine Dimensions
Figure: PC3620SD Preheating Triple Roller Coating System Machine Dimensions
Blower and ducting to be supplied by user if necessary.
Model Exhaust Volume Port Size Blower Power Ducting Diameter
PC3620SD
1000CFM
[28.3CMM]
8" [203mm] Diameter
1/3HP
8" [203mm]
Galvanized
PC3630SD
1000CFM
[28.3CMM]
8" [203mm] Diameter
1/3HP
8" [203mm]
Galvanized
1250 lbs.
[567.0kg]
1450 lbs.
[657.7kg]
PC3630SD
102" x 63" x 65"
[2.6m x 1.6m x 1.7m]
index001011.jpg arguslogo.gif index001009.jpg index001007.jpg index001013.jpg index001005.jpg index001003.jpg index001001.jpg
Home | Products | Distributors | Topics | LPISM FAQ | About Us | Contact Us | Terms of Use | Site Map
Liquid Photo-Imageable Solder Mask | Photovoltaic Thin Film | Hot Air Leveling | Fusing | UV Processing