index004003.jpg index031021.jpg index005007.jpg
Copyright 1997-2017 Argus International. All rights reserved.
bookmarkwhitespot.jpg
PC4700 Series Preheating Fusing Systems
The PC4700 series fusing systems were designed to reflow double sided and low mass multilayer circuit boards. The system of one temperature controlled long wave IR emitting zone for a saturating preheat and one short wave IR emitting zone with independent upper/lower lamp control. This patented fusing technique provides a wider process window than all lamp systems. The preheat and reflow zone emitters are selected specifically for the preheat and reflow purposes respectively.

The control system provides highly accurate temperature and lamp power control. Temperature control is within 2 degrees Celsius. Lamp power control is within 1% of full power. Conveyor speed is controlled to within 1% of full speed.
AVAILABLE OPTIONS
EXIT EXTENSION: A 24" [610mm] long conveyor on the exit of the fuser. This is particularly useful for removing or visually inspecting parts prior to postcleaning.
REMOTE CONTROL CONSOLE: Provides a separate NEMA rated console for the system controls a distance of up to 10 feet [3 meters] away from the machine.
CONVEYOR HEIGHT: Standard equipment conveyor height is adjustable between 42"-44" [1067mm-1118mm]. Custom heights may be available with this option.
ELECTRICAL SERVICE REQUIREMENTS
Circuit Breaker service is 3-phase configuration with a good Ground.
EXHAUST SERVICE REQUIREMENTS
Main Exhaust - Transition and ducting to be supplied by user.
SHIPPING DATA
Air Freight
1000 lbs.
[453.6kg]
1400 lbs.
[635.1kg]
Model
Crate Size
Common Carrier
Crated Weight
PC4820SD
102" x 49" x 65"
[2.6m x 1.3m x 1.7m]
Crating dimensions and weights are approximate and may vary within 10%.
Model 200-240V 50/60Hz 380-415V 50Hz  440-480V 50/60Hz Power
PC4720SD 100A 70A 70A 35kVA
PC4730SD 150A 100A 100A 53kVA
Model Exhaust Volume Transition Adaptor* Blower Power Ducting Diameter
PC4720SD
1500CFM
[42.5CMM]
11-7/8" x 8-1/16" [302mm x 205mm]
Rectangular to 10" Diameter
3/4HP
10" [254mm]
Galvanized
PC4730SD
2500CFM
[70.8CMM]
13-1/4" x 9-3/4" [337mm x 248mm]
Rectangular to 12" Diameter
1-1/2HP
12" [305mm]
Galvanized
Figure: PC4730SD Fusing System Machine Dimensions
Figure: PC4720SD Fusing System Machine Dimensions
1200 lbs.
[544.3kg]
1650 lbs.
[748.4kg]
PC4830SD
123" x 63" x 65"
[2.6m x 1.3m x 1.7m]
index001011.jpg arguslogo.gif index001009.jpg index001007.jpg index001013.jpg index001005.jpg index001003.jpg index001001.jpg
Home | Products | Distributors | Topics | LPISM FAQ | About Us | Contact Us | Terms of Use | Site Map
Liquid Photo-Imageable Solder Mask | Photovoltaic Thin Film | Hot Air Leveling | Fusing | UV Processing