index004003.jpg index032020.jpg index005007.jpg
Copyright 1997-2017 Argus International. All rights reserved.
bookmarkwhitespot.jpg
PC4800 Series Preheating Fusing Systems
The PC4800 series fusing systems were designed to reflow multilayer or high mass circuit boards. The system consists of two independently controlled long wave IR emitting zones for a saturating preheat and one short wave IR emitting zone for a controlled reflow. The preheat zones total over 50" [1.3 meters] of conveyor providing ideal preheating.

The control system provides highly accurate temperature and lamp power control. Temperature control is within 2 degrees Celsius. Lamp power control is within 1% of full power. Conveyor speed is controlled to within 1% of full speed.
AVAILABLE OPTIONS
EXIT EXTENSION: A 24" [610mm] long conveyor on the exit of the fuser. This is particularly useful for removing or visually inspecting parts prior to postcleaning.
REMOTE CONTROL CONSOLE: Provides a separate NEMA rated console for the system controls a distance of up to 10 feet [3 meters] away from the machine.
CONVEYOR HEIGHT: Standard equipment conveyor height is adjustable between 42"-44" [1067mm-1118mm]. Custom heights may be available with this option.
ELECTRICAL SERVICE REQUIREMENTS
Circuit Breaker service is 3-phase configuration with a good Ground.
EXHAUST SERVICE REQUIREMENTS
Main Exhaust - * Transition and ducting to be supplied by user.
SHIPPING DATA
Air Freight
1250 lbs.
[567.0kg]
1700 lbs.
[771.1kg]
Model
Crate Size
Common Carrier
Crated Weight
PC4820SD
123" x 63" x 65"
[3.1m x 1.6m x 1.7m]
Crating dimensions and weights are approximate and may vary within 10%.
Model 200-208V 50/60Hz 220-240V 50/60Hz 380-415V 50Hz  440-480V 50/60Hz Power
PC4820SD 150A 175A 100A 100A 48kVA
PC4830SD N/A N/A 150A 150A 72kVA
Model Exhaust Volume * Transition Adaptor Blower Power Ducting Diameter
PC4820SD
1500CFM
[42.5CMM]
11-7/8" x 8-1/16" [302mm x 205mm]
Rectangular to 10" [254mm] Diameter
3/4HP
10" [254mm]
Galvanized
PC4830SD
2500CFM
[70.8CMM]
13-1/4" x 9-3/4" [337mm x 248mm]
Rectangular to 12" [305mm] Diameter
1-1/2HP
12" [305mm]
Galvanized
Figure: PC4830SD Preheated Fusing System Machine Dimensions
Figure: PC4820SD Preheated Fusing System Machine Dimensions
Auxiliary Exhaust - Blower and ducting to be supplied by user if necessary.
Model Exhaust Volume Port Size Blower Power Ducting Diameter
PC4820SD
1000CFM
[28.3CMM]
8" [203mm] Diameter
1/3HP
8" [203mm]
Galvanized
PC4830SD
1000CFM
[28.3CMM]
8" [203mm] Diameter
1/3HP
8" [203mm]
Galvanized
1350 lbs.
[612.4kg]
1800 lbs.
[816.5kg]
PC4830SD
123" x 63" x 65"
[3.1m x 1.6m x 1.7m]
index001011.jpg arguslogo.gif index001009.jpg index001007.jpg index001013.jpg index001005.jpg index001003.jpg index001001.jpg
Home | Products | Distributors | Topics | LPISM FAQ | About Us | Contact Us | Terms of Use | Site Map
Liquid Photo-Imageable Solder Mask | Photovoltaic Thin Film | Hot Air Leveling | Fusing | UV Processing