index029024.jpg index029022.jpg index004003.jpg index005007.jpg
Figure: PC6620 Solder Stripping System Machine Dimensions
Model Total Exhaust Volume Port Size Blower Power Ducting Diameter
PC6620
600CFM
[42.5CMM]
4" [102mm] Diameter
Two Pipes
1/3HP
4" [102mm]
Two Pipe PVC
Exhaust blower and ducting to be supplied by user.
Copyright 1997-2017 Argus International. All rights reserved.
bookmarkwhitespot.jpg
PC6600 Series Solder Stripping Systems
The PC6600 series solder stripping systems are designed to strip plated tin or tin lead printed circuit boards. Using a recirculated chemical spray technique, the panels are exposed to the various chemistries available which will efficiently remove the tin or tin-lead. This system is intended to solder strip, then passivate the surface for future processing but can also be used as a solder strip system only if an exothermic chemistry is used, sump cooling may be a necessary option.

This system is fabricated from PVC construction, but the chemistry should be specified to assure complete compatibility. Other Argus products related to the solder stripping system is the PC6120 Developer/Solder Stripper. This dual purpose machine may be used as an LPISM developer or solder stripping machine if passivation is not required. When used as a solder stripping system, the 6120 has more throughput than the PC6620 because all chambers are devoted to solder stripping.
AVAILABLE OPTIONS
SUMP HEATING & COOLING: Provides the ability to heat or cool stripping solutions dependent on the desired application.
Some solder stripping solutions are more active when heated, and others produce heat during the stripping process.
This option provides ample heating or cooling of the sump chemistry.
ELECTRICAL SERVICE REQUIREMENTS
Circuit Breaker service is 3-phase configuration with a good Ground.
FRESH WATER RINSE REQUIREMENTS
SHIPPING DATA
Air Freight
1000 lbs.
[453.6kg]
1400 lbs.
[635.1kg]
Model
Crate Size
Common Carrier
Crated Weight
PC6620
102" x 63" x 65"
[2.6m x 1.6m x 1.7m]
Crating dimensions and weights are approximate and may vary within 10%.
Model 200-240V 50/60Hz 380-415V 50Hz  440-480V 50/60Hz Power
PC6620 30A 30A 30A 7kVA
Connection Fittings
PC6620
4 gal [15.14 liters]
per minute
Model
Volume
Two 1-1/4" NPT Service
PVC
DRAINAGE REQUIREMENTS
Rinse and Tank Drains (Tank Drain Valve is included and is a gravity fed drain)
Connection Fittings each
PC6620
4 gal [15.14 liters]
per minute
Model
Volume each
1-1/2" NPT
PVC
EXHAUST SERVICE REQUIREMENTS
index001011.jpg arguslogo.gif index001009.jpg index001007.jpg index001013.jpg index001005.jpg index001003.jpg index001001.jpg
Home | Products | Distributors | Topics | LPISM FAQ | About Us | Contact Us | Terms of Use | Site Map
Liquid Photo-Imageable Solder Mask | Photovoltaic Thin Film | Hot Air Leveling | Fusing | UV Processing